how to make a fish pin

this one is in honor of National caviar day(poor little baby fish)

you are gonna need a few things

an old pin(like one you would wear not a sewing or baby pin)

duct tape

scissors

sharpie

first you are going to make a 4 inch long strip

next flip it over and put duct tape on so there is no sticky showing

now sorta fold the duct tape but make sure there is no crease

then you cut out half a fish

unfold the duct tape and  you have a fish

now take the sharpie and design it however your little heart desires

finally glue the sweet innocent fish to the pin

tada now you can proudly wear your fishie pin!!!!!!!!!!!!!!!!!!!

spam…

i can not belive im doing this but im taking a moment to talk aout spam. what is spam i dont give a crap but all i know is it can do bad things do online stuff. the reason i though of this is because i went to redo my site (hope you like it) and i ran into my spam count which i dont like to look at cause i just assume everybody loves innocent little me but then i saw the ammount of spam that i had gotten and i was all like OMG why do people hate me so much. i mean you must hate me if you are going to send me spam. then i was super sad for like 5 minutes because of you guys i will never ever get that time back. worse of all then i got another spam then i started writing this and you guys are reading it which brings us to right now. i mean like right now for me not for you. waitand you to i think wait im confusing my self due to the fact that we have two different right nows OMG im pulling a cat valentine(that means im freaking out) ahhhhhhhhhhhhh im you need me i will be in my room giving myself a headache thinking and freaking out. oh and rember send me no spam!!!!!!

how to make a beach ball

ok tell me if this works because i ran out of duct tape and i cant try it out for myself

first you are gonna need a few things

duct tape

scissors

air pump

my guidance

  1. first you are going to create a giant circle with a radius (see I used a smart people word there) I would make 3 feet long.
  2. FYI for all oh you who don’t know how to make a sheet of duct tape or a circle out of duct tape I have an article for that too.
  3. next repeat step number 1 again.
  4. now you are gonna tape them together along the edges and cut a hole so you can blow it up or if you have a bicycle pump you can just stab it and blow it up then put a piece of tape where the hole is
  5. blow it up
  6. tada you have a beach ball

my amigos

three posts in one day that has to be like one of by records or somthing but i felt the need to inform you thatt i still have not been viewed on AFRICA. i think africa doesnt like me or somthing but here is where i have been viewed that includes hawaii aloha i think

Country Views
United States FlagUnited States 751
Canada FlagCanada 53
United Kingdom FlagUnited Kingdom 49
Australia FlagAustralia 17
Italy FlagItaly 12
Mexico FlagMexico 8
Venezuela FlagVenezuela 7
Russian Federation FlagRussian Federation 6
Philippines FlagPhilippines 4
Chile FlagChile 4
Netherlands FlagNetherlands 3
Portugal FlagPortugal 3
Trinidad and Tobago FlagTrinidad and Tobago 3
Brazil FlagBrazil 3
Indonesia FlagIndonesia 3
Spain FlagSpain 2
Argentina FlagArgentina 2
Belgium FlagBelgium 2
Norway FlagNorway 2
Czech Republic FlagCzech Republic 1
Croatia FlagCroatia 1
Georgia FlagGeorgia 1
United Arab Emirates FlagUnited Arab Emirates 1
Romania FlagRomania 1
India FlagIndia 1
Poland FlagPoland 1
Saudi Arabia FlagSaudi Arabia 1
Ireland FlagIreland 1
Singapore FlagSingapore 1
New Zealand FlagNew Zealand 1
Peru FlagPeru 1
Malaysia FlagMalaysia 1
Malta FlagMalta 1
Hong Kong FlagHong Kong 1
France FlagFrance 1
Ukraine FlagUkraine 1
Israel FlagIsrael 1
Costa Rica FlagCosta Rica 1
Puerto Rico FlagPuerto Rico 1
Germany FlagGermany 1
Slovakia FlagSlovakia 1

how to create a duct tape sheet

  • As I was blogging the last time I realized,”not everybody knows what the heck im talking about”. so im doing how to make a duct tape sheet and many more things in this blog I would like to call in(quick pause for suspense) simple things to make  making duct tape things easier.
  • how to make a duct tape sheet
  • first you are gonna need a few things
  • duct tape
  • my guidance
  • scissors
  • optional a ruler
  • 1.first you are going to lay out 12 in tall by 8 in the other way of duct tape with each edge height wise slightly overlapped
  • 2. next you are gonna flip it over or not just make it so the sticky side is up
  • 3. now you place them instead of vertically horizontally sticky side on sticky side until there is no more sticky showing
  • 4.now you are done
  • how to make a circle out of duct tape
  • first you are gonna need a few things
  • duct tape
  • scissors
  • something flat but in the shape of a circle on the bottom
  • first create square piece bigger than the circle you want
  • now place the object you want to trace on the not sticky side
  • trace the edge of the object with the blade of the scissors
  • cut the little indent you created with the scissors
  • tada you are done
  • how to tie a bow tie
  • first you are gonna need a duct tape bow tie
  • Adjust the tie’s length so it fits your neck size.

  • 2.Lift up your collar and put the tie around your neck so the ends hang down in  front. One end should hang about one and one-half inches lower than the other.
  • Bring the longer end across, behind and over the shorter end, forming a simple  knot. Pull the knot snugly  around your neck.
    • Fold the shorter end where the hourglass shape begins to narrow (the widest  point of the shorter end), forming a bow shape. The bow shape should be in  front. Hold the bow in a horizontal position at your neck.

    • 5. Bring the longer end over and in front of the shorter end.
  • 6.Fold the longer end where the hourglass shape begins to narrow, forming a  second bow.
    • 7.Bring the second bow under the first bow.
    • Tuck it into the space behind the first bow.
    • 9.Adjust the shape of the two  bows.

Read more:  How to Tie a Bow Tie | eHow.com http://www.ehow.com/how_2649_tie-bow-tie.html#ixzz1yFce98sw

that all for now

how to make a duct tape bow tie

first you are gonna need a few things

  • duct tape
  • scissors
  • OPTIONAL
  • wire and velcro
  • beads/sequins exc.
  1. first you are gonna need to create the design of a untied bow tie(if you do not know what that looks like look it up on the magical thing called the internet or google)
  2. now for the dimensions, for some random person would be,  4.9 x 2.8 inches tied; neck strap is 13 inches long.
  3. now for the cut out design there are two ways to do this , one you could look up a design pattern of a bow tie and print it out or two if you feel up to the challenge and have enough duct tape you could just free hand it.(I recommend the first option.)
  4. now we use duct tape create a sheet of duct tape that’s 15 in tall by 5 in wide so you have plenty of room to cut and draw and stuff
  5. after creating a sheet with the dimensions(a sheet means there is NO sticky stuff showing by simply putting more duct tape stick side to sticky side) chose plan one or plan to and begin!
  6. now you have your design to your liking now you have the option to decorate it.
  7. now its time to tie it on your neck sorry for all who know how to tie a bow tie but im putting instructions anyway but on a separate blog thingy whatever.
  8. now this is optional but highly recommended get a friend YOU TRUST WITH SCISSORS NEAR YOUR NECK and cut the bow tie off
  9. add velcro so all you must do is velcro it on instead of having a wrinkly bow tie ( i will tell you more about that in another blog thingy whatever.)
  10. TADA you are done now go wear to wherever 🙂

guess what…

Ive hit 1000 views all time and it turns out im popular all around the world im popular in/ thanks to all and maybe i can get a view on the contient of Africa so if any of you are going /moving/living in Africa look me up then i will have been viewed on every conitent accept Artica/Antartica!!!!!!!! oh and did you know Afganistan has internet connection this probably sounds stupid but i didnt know that you learn somthing new everyday!!!!!!!!!!!!!!!!!!!

 United States 603
Canada FlagCanada 34
United Kingdom FlagUnited Kingdom 27
Italy FlagItaly 11
Australia FlagAustralia 11
Mexico FlagMexico 6
Venezuela FlagVenezuela 5
Russian Federation FlagRussian Federation 5
Portugal FlagPortugal 3
Brazil FlagBrazil 3
Philippines FlagPhilippines 3
Trinidad and Tobago FlagTrinidad and Tobago 3
Argentina FlagArgentina 2
Belgium FlagBelgium 2
Indonesia FlagIndonesia 2
Netherlands FlagNetherlands 2
Malta FlagMalta 1
New Zealand FlagNew Zealand 1
Czech Republic FlagCzech Republic 1
Saudi Arabia FlagSaudi Arabia 1
Spain FlagSpain 1
Singapore FlagSingapore 1
Poland FlagPoland 1
Croatia FlagCroatia 1
Norway FlagNorway 1
Slovakia FlagSlovakia 1
Chile FlagChile 1
Ireland FlagIreland 1
Puerto Rico FlagPuerto Rico 1
Peru FlagPeru 1
France FlagFrance 1
Malaysia FlagMalaysia 1
Costa Rica FlagCosta Rica 1
Germany FlagGermany 1
Ukraine FlagUkraine 1
Hong Kong FlagHong Kong 1
Israel FlagIsrael 1

how to make a saint patricks day bow

first you are gonna need a few things tape

x-acto knife

duct tape

Optional

coin

ruler

FYI THIS IDEA WAS FOUND ON DUCTBRAND.COM

Step 1

Make one sheets of duct tape  1 strip wide by 11 inches long.

                            Step 2

Decorate your duct tape fabric with stripes, polka dots or clovers. For polka dots, trace a coin over a strip of duct tape using your pen and cut out the circles with the crafting knife. For stripes, cut long strips of various widths and colors and lay them on your duct tape fabric, then trim off the excess tape. For clovers lay out a piece of green or lime duct tape onto your cutting board, and either draw or stencil a clover onto the duct tape using your pen. Cut out the shape with your crafting knife.

                            Step 3

Fold your piece of duct tape fabric in half lengthwise (creating a crease), reopen it, then bring both edges of the fabric to the crease in the middle. Where the ends of the strip meet, pinch it together with you fingers and secure by wrapping a 1 inch piece of duct tape 1 inch wide around the middle.

I NEED YOUR HELP!!!!!!!!

 my fans, i need your brillant and amazing ideas to post on my web site so you can come every day and see a new and unique idea and if i like it enough i will post it,(or if i need ideas really bad but probably the first one)so give me lots of weird and awesome ideas!!!!!!!!!!!!!!!!!

How to make duct tape card

Nothing says I love you, or happy birthday, or whatever holiday than a duct tape card.
First you are gonna need a few things:
Duct tape
Scissors
Sharpie
Mat (optional)
First cut the strips so they are the FULL LENGTH OF THE CARD. Not just the front or they back but the length if you were to flatten it then wrap it with ribbon. the length of the duct tape should be the length of that ribbon.
next repeat that step 5-8 time
Now this is the fun part, DECORATE THE CARD!!!!!!!!!!!
Now sign your name and give it away
Hope you enjoyed my reading 🙂